Drawings of sniper rifles made of wood. How to make a sniper rifle out of wood? DIY wood sniper rifle. How to make a toy machine and wood

IN modern world many children are practically indifferent to toys. Electronic gadgets are of much greater interest now. Of course, every parent is concerned about this and is trying to introduce the kid to play with real objects.

One of the best ways you can wean your child from virtual worlds is to make a toy with him. A hand-made machine will be a great toy with which you can have a lot of fun. And if you manage to save it, then it will be an excellent souvenir "from childhood", entailing a lot of pleasant memories.

There are several ways you can create an automaton. It all depends on how much time and effort you are willing to invest in the craft. Another important factor is the availability of all the necessary tools. Indeed, not everyone has in stock a whole set for the carpentry craft.

If the child for whom the product is intended is old enough, then you can additionally diversify the toy. Namely, add a shooting function.

The main thing to remember is not to overshadow the creation process. wooden machine, do not forget about the basic safety rules. Protect your hands when working with cutting tools. Purchase a protective mask and respirator in advance, for working on a grinding machine or with sandpaper.

There are tons of fun activities that you can play with your children. Undoubtedly, these are outdoor games. At the same time, an integral advantage of a wooden toy is its durability. What can not be said about plastic counterparts.

How to make a simple machine out of wood

To diversify your child's games, you can make a simple wooden machine. It won't take long, but you need to prepare everything you need first.

Tools:

• Circular saw;
• Drill;
• Jigsaw;
• Sharpener 10 cm.
• Sandpaper;

For ease of use, print a drawing of the machine model. The drawing can be found without much difficulty on the Internet. Then follow the instructions below:

• Take a block of wood or a piece of thick board;
• Based on a drawing or photograph of the machine gun, carefully mark the boundaries of the future weapon on the tree with a marker;

If you print an image of the machine on paper, and then cut it out and use it as a stencil, the product will turn out to be very realistic. After all, all the proportions can be observed.

• Start cutting straight lines with circular saw;
• Pay particular attention to cutting out the curved parts of the machine. To do this, you must use a jigsaw;
• Use a sharpener to process the weapon along the contour;
• To make the rifle more interesting, remember to drill holes such as the muzzle;
• Polish the resulting weapon by hand using sandpaper;
• Take a small piece of wire, preferably aluminum, to build the trigger;
• At the end, paint the machine or cover it with varnish;

Such toy machine made of wood is quite simple to manufacture, and will bring a lot of joy to the child.

How to make a realistic Kalashnikov assault rifle

A realistic model of the machine can be made at home using the available tools. So, here's a list of things you'll need:

• Thick and wide board (the thickness must be at least 4 cm);
• Wood stalk (thin enough);
• Plywood sheet;
• PVA glue;
• Paint;
• Jigsaw;
• Milling machine;
• Sandpaper;
• Magnets;
• Marker;

First, choose the necessary material for work. Better to choose a pine board.

When choosing wood for the product, please note that there should be no branches or chips on it.

We sketch on the wood. Marker outline the outline of the future "Kalashnikov". It should be borne in mind that the store will be separately attached to the machine, so you need to draw it separately. When the image is ready, start carefully cutting the blank with a jigsaw.

In order for the magazine to be securely attached to the base of the weapon, you need to try it on and grind it several times. Nothing should catch on, only in this case the child will be comfortable during the game.

On a milling machine, add volume to the product. To do this, you need to chamfer the handle, as well as the butt. Subsequently, grind the workpieces as best as possible.

Take the prepared side pieces, cut from plywood, and glue them to the main part of the machine, greasing them liberally with glue. Particular attention should be paid to the contour of the workpiece. Then press down on all the parts, for a more reliable adhesion, and leave for several hours until completely dry. As a result, it is worth sanding the product again so that the plywood parts do not stand out.

Start modeling the barrel of the future wooden machine gun. At this stage, you will need a thin stalk (you can make it yourself, or purchase it from the construction department of the store). You also need to cut out the front sight and drill holes in the machine to fasten the barrel later. Lubricate all parts with glue at the bonding points. After the vending machine is completely assembled, give it time to dry.

At the final stage, paint the resulting machine model. You can use dark paint or varnish.

If you prefer paint, then use water-based paint. It is safer.

Magnets must be used to secure the magazine to the machine. If the purchased magnets are in the shape of a tablet, then before gluing them, it is worth drilling small holes in the store and the inside of the machine. The diameter of the holes must match the diameter of the magnets. If a roll-type magnet was purchased, then glue a piece of the magnet of the desired shape and size to the inside of the machine. And in this case, you need to glue a metal plate to the store. It is better to choose glue of quick drying, or superglue.

Now the wood machine is ready. This weapon model is very interesting and realistic, which means it will undoubtedly be in demand among children.

How to make a toy machine and wood

Before you start working on your future toy, carefully draw a sketch of the future machine and transfer it to the material from which the product will be made. In this case, each detail must be drawn separately.

Make sure you have all the tools you need for the job at your fingertips. For the initial finishing you need: hammer, chisel, hatchet, plane, hacksaw for wood, hacksaw for metal, drill, level.

For harvesting, you should choose coniferous wood. And leave at least 15% of the material on the “blank” as a reserve. This is required for subsequent adjustments to the shape of the product. All elements of the future machine are cut out separately.

After all the parts are cut out of wood, you need to move on to the sanding stage. Use the following sequence to achieve the desired result. First, process each part with files. Then use coarse sandpaper, and then fine sandpaper to bring the surface of the product to the required level of smoothness.

At the last stage, start designing your future toy. To do this, cover the surface of the wood with varnish, preferably in two layers. Prime the places where the paint will be applied.

Let the toy machine dry. And you can start playing.

How to make a Schmeiser machine

There are different ways to make a machine gun out of wood. It all depends on your craftsmanship and the materials at hand.

To make a model of the machine you will need:

• Wooden lath - 2 pcs.;
• Super glue;
• Nails;
• Espagnolette;
• Hacksaw;
• Sandpaper;

The boards or slats to be used must be at least 50 centimeters long. We cut the first rail along the middle, leaving only a third. While the bottom part needs to be removed. Divide the second rail into two unequal segments. The longer part will be the magazine, and the short one will be the handle of the future machine.

The prepared parts of the product must be sanded with sandpaper. Then fasten all the parts using glue.

Also, any weapon needs a front sight. Make it from a nail, gently driving it in the top of the barrel. Make the trigger in a similar way. Attach a latch on the side of the machine as a bolt.

At the final stage, once again sand the future toy with sandpaper. Then cover the entire machine with a dark paint. And let the product dry.

Now you can play with such a machine with pleasure and gain new victories.

How to make a simple Schmeiser

It often happens that there is not enough time to create a complex automaton model. But this is not a problem, because a simple Schmeiser can be made from scrap materials. You will need:

• Chisel;
• Nails;
• A pair of wide slats;

Divide one of the slats into two parts. It is desirable that one of the halves is longer than the other.

On the second rail, cut a few pieces in the area of \u200b\u200bthe future trunk. Also on the opposite side, saw off a piece of wood so that you get a sharp corner. It will be an impromptu butt, machine gun.

Finally, attach the magazine and the handle to the main body of the toy using nails.

How to make a dummy machine gun out of wood

Plain plywood is often an excellent material for creating a dummy. Using one of the methods, you can easily make a model of the machine yourself.

To work you need the following "basic" tools and accessories:

• Plywood.It is not necessary to use a whole sheet of material, in most cases, scraps are enough. However, it is important that the pieces are of the correct size and thickness. Sometimes it is worth choosing a thicker plywood, since the layout can be subjected to significant loads during use;
• Tools.This list includes both tools for grinding and cutting. To make various recesses and holes on the surface of the dummy, you must have a carpenter's knife or chisel at hand. While for sanding a few sheets of sandpaper, varying in grain size, are enough;
• Protective covering.The future product, first, must be coated with a special compound that protects against moisture. And then cover the dummy with wear-resistant paint. Most often, black wood paint is used. But you can also use silver.
• Glue. In order for all parts of the machine to be securely fastened, it is necessary to use epoxy resin as an adhesive. If it is not available, then you can do with PVA glue. And in some cases, even superglue;

To create a real dummy, you need to find a sketch of a real machine in advance. It is advisable that all exact dimensions are indicated on the drawing.

When all the components of the future dummy have already been cut out of plywood, it is necessary to glue them together and securely fasten them until they are completely dry. Clamps are very helpful in this process. They will securely enough fix all the parts together.

In order for the "blank" to take the shape of the desired machine, it is necessary to recreate all the holes and recesses. Use a jigsaw for this, first drilling the holes, and then shaping them.

A dummy must have a realistic look. So you will need to work hard. If you don't have a lot of experience with picks, it's best to start with the simpler parts. Otherwise, you can accidentally damage the product and work will have to start from scratch. However, the result should please with its similarity to the original.

Pay special attention to grinding. To give the necessary smoothness, carefully process the dummy with sandpaper. First, go over the entire surface with coarse sandpaper. For example, marked M - 100. And then use fine paper for finishing.

Of course, you need to paint the dummy. Please note that the colors must match the original of the given model of the machine. Choose the colors you want.

How to make a machine gun that shoots with rubber bands

Any model of the machine presented above can be modified by adding the ability to shoot.

The easiest way is to attach a small handle to one side of the machine. A thin strip may also work. You can install the "trigger" both from above and from the side. The main thing is to be comfortable for small children's hands.

You can attach the stalk with nails or super glue. The main thing is that the mount is reliable.

Another thing necessary for shooting is an elastic band. Better to use the so-called "bank" rubber bands. They cost very little and are also great in size. A couple of such rubber bands are possible, you can find them in your organizer. To charge the weapon, weave two rubber bands, to one of which attach a paper clip. If possible, it is better to do several charges. Gently grasp a paper clip to fire a shot. In this case, the elastic must be pulled to the very edge of the cutting. Then release the paperclip.

Try not to point the weapon at people and animals, because the shot can be very powerful and harm others.

How to modify the machine

In order for the wooden weapon to be fully equipped, in addition to the machine gun itself, you will need a bayonet, a knife and a belt for carrying. This will be especially true if the toy was made of dense wood.

The belt can be made of canvas tape. And to be attached to the machine on two rings of metal wire, or in pre-cut holes. Also, for more comfortable wearing, you should make a "double loop" from the tape. To do this, you will need a piece of the weapon strap twice the length of the standard length and a ring of thick wire. First, we attach the belt to the machine so that one of the edges is fixed near the barrel, then we thread the belt into the prepared ring and draw it closer to the base of the barrel. We pass the middle of the tape through the mount near the butt. If everything is done correctly, there should be a long "tail" from the belt, to the edge of which, it is necessary to sew a ring made of strong metal, which remains hanging on the fixed section of the tape.

In the future, it is the elongated part of the belt that is put on the person, and the machine remains hanging on it. This option of carrying a wooden weapon will allow the child to play carefree, without having to hold the machine gun with his hand all the time. However, when calculating the length of the belt, it is worth considering that in the free position, the muzzle should not touch the ground.

Now the wooden dream machine is created and fully equipped!

Today, toy stores offer such a large and colorful selection that parents grab their heads and children drool. Unfortunately, the economic situation and one's own capabilities do not always allow one to have enough income to please one's own child with a good gift. Hands and head to help us! You can always make some of the toys yourself. Many craftsmen cut cars, horses, whatever they like from wood and sell them.

Wood is a very convenient material, with minimal skill in handling it and the necessary tools, you can do a lot. For girls, you can cut dolls, furniture, dishes from it, and for boys - a typewriter, a gun, a sword. The question of how to make a weapon out of wood is of great interest to them!

Wood weapon options

In fact, you can do a lot, the main thing is, why do you need a specific thing? For a child who will play in the yard, to use weapons for their intended purpose, for role-playing games, for hunting, or maybe for a costume? Homemade weapons made of wood will take the form and shape you desire.

If the main purpose is play, then the main thing in this case is strength. All paint and delicate fragile parts will fly off in a few days, if not immediately. When military field gatherings are held in schools, and schoolchildren are given wooden Kalashnikovs for them, 50% of the guys open shops on the first or second day. But these machines are made with a stream, not caring too much about beauty, painting in one color and trying to make them stronger. Ask how to make a weapon out of wood that won't break? No way, the thing will remain intact only if you do not use your product.

For roleplayers, the situation is much more complicated, they need weapons that are both beautiful and durable, so they often use other materials. If, after all, a tree, then they make two swords or knives, one is beautiful, the second is durable.

Material selection and processing

The choice of material depends on how long the processing will take. Birch is a very durable and stubborn tree, it is good to make a club from it, without special processing the product will be heavy. Aspen, poplar, pine are softer, it is easy and pleasant to work with them. Oak is rare in many regions of Russia, but if you decide to make a weapon with your own hands out of wood, then you will hardly find a better material. It is easier to process than birch, lighter in weight and stronger than pine, and retains quality well over time.

Wood for products should be free of knots, wood holes, rot, with a single direction of fibers, without distortion. It is necessary to dry it, preferably in a dry room or under a canopy. It is necessary that the tree dries evenly without direct exposure to sunlight, otherwise then it will begin to crack and bend.

Making a club

The simplest wood weapon is a club or stick. What could be simpler, broke off a branch - and you're done. But if suddenly you decide to approach this issue seriously, you want to make a durable, lightweight, comfortable product, then the question "how" arises before you. Making a weapon out of wood by all the rules is not easy.

A young tree of suitable size is chosen for the club. Sawed closer to the root, as the fibers begin to intertwine at the butt, making the material even more durable. Then, carefully, so as not to damage the upper layers, remove the bark, cut off the knots, give the desired shape to the handle, if necessary, soak the workpiece in water or special brines for a day. Then the drying begins, a fire is made and on the smoke, protecting the future club from the tongues of flame, they dry it. As soon as the tree has turned black, the blackness is removed with fine sand or hard grass. This is repeated six times, the surface is smooth and dry. Even if birch was chosen, the final product will be light and durable. Such a tree does not rot.

By the same principle, our ancestors made strong arrows and spears without steel tips.

Shield and sword

How to make wood weapons for RPGs and historical reenactments? If for beauty and entourage, then it is very convenient to cut the shape out of plywood with a jigsaw, smooth the edge, varnish, paint, insert decorations. With good paint, without taking a thing in hand, it will be difficult to determine what material it is from. For combat, it is worth making a weapon of thick durable wood, with a comfortable handle so that vibration from the impact is less transferred to the hand, otherwise you can damage the hand or just drop the object at the first hard collision.

The shield is excellently made from plywood, but for combat it is better to use iron-bound or steel options with a shock-absorbing lining. During reconstructions, they usually show a wall fight, in which it is extremely difficult to deliver a strong blow to the shield. A good and durable one is needed for individual combat, for all other cases it is suitable from plywood.

Models of firearms

No matter how much I would like, but to make homemade firearms from a tree that will shoot is impossible. Is that for one or two shots, and it is not a fact that the weapon will not explode when the powder explodes.

All samopal schemes are reduced to one algorithm. The tree is a frame to which the trunk is attached, a trigger with a striker, sometimes a magazine is added. Inconvenient, short-lived, but cheap and cheerful.

Hunting weapon

Do you remember when you were a child you ran around with slingshots? If you haven't run, be sure to try it, you will love it. Modern resilient materials impart such punching power to a small metal ball or pebble that, with the right skill, you can shoot down targets from thirty paces. But the frame of a slingshot can be easily made of wood.

Wood weapon designs for hunting are fairly common. So, crossbows and bows are made. The wooden frame is not so difficult to make, manual dexterity and no magic. But there is important detail, which is necessary to do weapon lethal and effective over long distances. This requires shoulders, flexible and strong, and a bowstring. There are old technologies for making shoulders, but nowadays it is too laborious and difficult to implement at home. It is easier to use modern materials such as plastic.

It is best to make the main frame out of wood, and the shoulders from flexible rotting plastic, the synthetic cord will go to the string. A little decoration and paint, and you get a completely entourage and effective bow.

Finding yourself alone with nature, you have to survive by getting food with the help of improvised means. It is good if you have a cold weapon or a hunting rifle with you. Once in a situation where there is neither one nor the other, you can make a weapon out of wood with your own hands.

Almost any weapon can be made from wood: a bow, a crossbow for hunting, a knife, a spear, a spear, a slingshot, an ax and even a gun. More details on how to make a weapon out of wood are discussed below.

Homemade knife, wooden

The choice of material for making weapons is a very important task.

• Birch is a durable and stubborn material; it is better to make clubs from it.
• Aspen, poplar and pine are softer and lend themselves well to various types of processing.
• But the most suitable for homemade wood is oak. Oak wood is well processed, light in weight, strong, does not lose its characteristics over time.

Before making a workpiece, you need to choose a material that does not contain knots, rotten areas, curvatures, fiber heterogeneity, then dry it without exposure to direct sunlight. When the material is ready, a weapon blank is produced.

DIY wooden slingshot

Slingshot

The simplest wood weapon is a slingshot. With the help of this throwing weapon, you can hunt birds and small game, and for the manufacture you need a minimum of materials - a strong elastic band or tourniquet, and a branch with a fork (it is better to use hazel).

The fork is cut from the main part of the barrel of the desired size, sanded, a tourniquet is attached to both ends. For reliability, small cuts can be made at the ends of the slingshot so that the tourniquet does not slip.

Wooden club

A weapon similar in simplicity is a wooden club. The disadvantage of this projectile is that it requires a short distance to use it, which can be very difficult while hunting. To make a club, you need to use a young tree, cut down closer to the root, where the wood is most durable. The bark is carefully removed from the surface of the workpiece, all knots, it is soaked for a day in water, then dried over a fire until black, which is then removed by grinding with sand and grass. This procedure needs to be done several times, as a result of which a strong club is obtained that does not rot.

DIY wood knife

Wood knives

An equally difficult homemade weapon is a wooden knife. It can be cut in one piece from a wooden block, or it can be made of two component parts... To do this, you need to draw a sketch of the workpiece on wooden blocks, then cut it out with a hacksaw. After that, both parts are glued together into a single whole. If the manufacture of a wooden knife is carried out in field conditions, then, as a rule, there is nothing to glue the component parts with. Therefore, it is cut from a solid block.

The blade sharpens well and is carefully sanded, after which it must be burned on fire, giving it strength. If possible, you can make the knife varnish, then moisture will not be afraid of it.

Wooden bow and crossbow

A bow or crossbow is an effective weapon in the forest, made of wood. There are many video examples of making a crossbow that describe the whole process in detail. First, the body of the crossbow with a groove for the arrow is cut. An arc will be attached at one end of the body, a trigger will be made at one third of the other end. It is better to make an arc from several layers of plywood, glued to each other, which, after drying, bend. You can make it out of metal. At both ends of the bow of the crossbow, holes must be made for attaching the bowstring. The arc is fastened to the body with a strong rope, if it is not at hand - with a wire. The bowstring is attached to the arc in such a way that it closely passes over the body, but does not touch it. The task of the trigger is to grab the bowstring and release it abruptly. The structure of the mechanism can be made in the form of a wide arc or a complex system of hooks.

Arrows for a crossbow are made of resilient wood, they are given a cylindrical shape, after which they are polished. The tip can be made of wood, metal or stone.

It is possible to make not only "cold" weapons from wood. You can make something like a pistol or a gun, but at the same time you need to understand that it will not last long. The algorithm for making a pistol is simple: you need to make a frame from wood to which the barrel is attached, as well as a trigger with a striker, you can add a magazine. A metal tube is used as a barrel.

It is difficult to make a full-fledged pistol out of wood, but you can make a dart-shooter that will become a full-fledged hunting shell. In order to make it, you need to cut out a cylinder from an empty aerosol can, into which a piston, carved from wood, is inserted. To ensure normal frictional force, a rubber skirt is attached to the piston. Next, the stem is made using a large nail and a spring. Inside the wooden frame, you need to make a hole in which the cylinder with the piston is placed. The trigger mechanism is made similarly to a crossbow, in more detail the installation process can be found in the video. The barrel of a dart gun needs to be made using a metal tube, and for darts, nails.

How to make a weapon out of wood?

Gone are the days when homemade pistols and wooden slingshots were almost the only entertainment for children. Today, more and more parents prefer to buy a toy in a store, but the more valuable the experience is for a child when he creates a weapon simulator with his own hands with your help. Our article offers a simple way to make a homemade wooden machine gun that shoots special bullets.

Materials and tools

You need

Fixtures and tools

• saw;
• hammer;
• pliers;
• sandpaper;
• small screws;
• nails;
• pVA glue or instant.

The process of making homemade weapons from wood

Trunk

You can make an automaton without creating preliminary drawings. Using a saw, prepare 3 parts of the future machine of the following sizes from wooden blocks:

1. 300 * 50 * 15 mm - receiver.
2. 150 * 40 * 15 mm - handle.
3. 200 * 40 * 15 mm - magazine.

The receiver will remain rectangular, but the remaining parts along the short side must be cut obliquely. At the handle, the angle of the saw cut should be slightly larger than at the store. Glue or nail both elements to the receiver with a beveled part. You need to mount the store in the middle, and the handle, stepping back slightly from the left edge. Moreover, the handle should be directed to the left, and the store to the right.

Butt

The stock is made from chipboard or a piece of board. Give it a distinctive shape. To do this, make one of the long sides of the rectangle beveled. You need to attach the butt to the receiver on the side where there is already a handle, using a hinged loop and self-tapping screws. Thus, you get a folding stock.

How to make a mechanism for shooting and bullets

Make a trigger and firing mechanism.

The final stage of making weapons

• give the receiver a somewhat rounded shape and paint the entire unit black;
• attach a latch to the left side of the machine, this will be the shutter.

You can watch a video about making weapons on this page.

Weapons made in this way should not be directed at people and animals, as metal bullets can cause injury. Make sure your child understands this well.

Material selection and processing

Making a club

Shield and sword

Models of firearms

Hunting weapon

How to make a weapon out of wood? Homemade Wood Weapons Blueprints

Today, toy stores offer such a large and colorful selection that parents grab their heads and children drool. Unfortunately, the economic situation and one's own capabilities do not always allow one to have enough income to please one's own child with a good gift. Hands and head to help us! You can always make some of the toys yourself. Many craftsmen cut cars, horses, whatever they like from wood and sell them.

Wood is a very convenient material, with minimal skill in handling it and the necessary tools, you can do a lot. For girls, you can cut dolls, furniture, dishes from it, and for boys - a typewriter, a pistol, a sword. The question of how to make a weapon out of wood is of great interest to them!

Wood weapon options

In fact, you can do a lot, the main thing is, why do you need a specific thing? For a child who will play in the yard, to use weapons for their intended purpose, for role-playing games, for hunting, or maybe for a costume? Homemade weapons made of wood will take the form and shape you desire.

If the main purpose is play, then the main thing in this case is strength. All paint and delicate fragile parts will fly off in a few days, if not immediately. When military field gatherings are held in schools, and schoolchildren are given wooden Kalashnikovs for them, 50% of the guys open shops on the first or second day. But these machines are made with a stream, not caring too much about beauty, painting in one color and trying to make them stronger. Ask how to make a weapon out of wood that won't break? No way, the thing will remain intact only if you do not use your product.

For roleplayers, the situation is much more complicated, they need weapons that are both beautiful and durable, so they often use other materials. If, after all, a tree, then they make two swords or knives, one is beautiful, the second is durable.

Material selection and processing

The choice of material depends on how long the processing will take. Birch is a very durable and stubborn tree, it is good to make a club out of it, without special processing the product will be heavy. Aspen, poplar, pine are softer, it is easy and pleasant to work with them. Oak is rare in many regions of Russia, but if you decide to make a weapon with your own hands from wood, then you will hardly find a better material. It is easier to process than birch, lighter in weight and stronger than pine, and retains quality well over time.

Wood for products should be free of knots, wood holes, rot, with a single direction of fibers, without distortion. It is necessary to dry it, preferably in a dry room or under a canopy. It is necessary that the tree dries evenly without direct exposure to sunlight, otherwise then it will begin to crack and bend.

Making a club

The simplest wood weapon is a club or stick. What could be simpler, broke off a branch - and you're done. But if suddenly you decide to approach this issue seriously, you want to make a durable, lightweight, comfortable product, then the question "how" arises before you. Making a weapon out of wood by all the rules is not easy.

A young tree of suitable size is chosen for the club. Sawed closer to the root, as the fibers begin to intertwine at the butt, making the material even more durable. Then, carefully, so as not to damage the upper layers, remove the bark, cut off the knots, give the desired shape to the handle, if necessary, soak the workpiece in water or special brines for a day. Then the drying begins, a fire is made and on the smoke, protecting the future club from the tongues of flame, they dry it. As soon as the tree has turned black, the blackness is removed with fine sand or hard grass. This is repeated six times, the surface is smooth and dry. Even if birch was chosen, the final product will be light and durable. Such a tree does not rot.

By the same principle, our ancestors made strong arrows and spears without steel tips.

Shield and sword

How to make wood weapons for RPGs and historical reenactments? If for beauty and entourage, then it is very convenient to cut the shape out of plywood with a jigsaw, smooth the edge, varnish, paint, insert decorations. With good paint, without taking a thing in hand, it will be difficult to determine what material it is from. For combat, it is worth making a weapon of thick durable wood, with a comfortable handle so that vibration from the impact is less transferred to the hand, otherwise you can damage the hand or just drop the object at the first hard collision.

The shield is excellently made from plywood, but for combat it is better to use iron-bound or steel options with a shock-absorbing lining. During reconstructions, they usually show a wall fight, in which it is extremely difficult to deliver a strong blow to the shield. A good and durable one is needed for individual combat, for all other cases it is suitable from plywood.

Models of firearms

As much as one would like, but it is impossible to make a homemade firearm out of wood that will shoot. Is that for one or two shots, and it is not a fact that the weapon will not explode when the powder explodes.

All samopal schemes are reduced to one algorithm. The tree is a frame to which the trunk is attached, a trigger with a striker, sometimes a magazine is added. Inconvenient, short-lived, but cheap and cheerful.

Hunting weapon

Do you remember when you were a child you ran around with slingshots? If you haven't run, be sure to try it, you will love it. Modern resilient materials impart such punching power to a small metal ball or pebble that, with the right skill, you can shoot down targets from thirty paces. But the frame of a slingshot can be easily made of wood.

Wood weapon designs for hunting are fairly common. So, crossbows and bows are made. The wooden frame is not so difficult to make, manual dexterity and no magic. But there is an important detail that is needed to make small arms lethal and effective over long distances. This requires shoulders, flexible and strong, and a bowstring. There are old technologies for making shoulders, but nowadays it is too laborious and difficult to implement at home. It is easier to use modern materials such as plastic.

It is best to make the main frame out of wood, and the shoulders from flexible rotting plastic, the synthetic cord will go to the string. A little decoration and paint, and you get a completely entourage and effective bow.

How to make a weapon out of wood

Finding yourself alone with nature, you have to survive by getting food with the help of improvised means. It is good if you have a cold weapon or a hunting rifle with you. Once in a situation where there is neither one nor the other, you can make a weapon out of wood with your own hands.

Almost any weapon can be made from wood: a bow, a crossbow for hunting, a knife, a spear, a spear, a slingshot, an ax, and even a gun. More details on how to make a weapon out of wood are discussed below.

Which tree to choose for making?

The choice of material for making weapons is a very important task.

• Birch is a durable and unyielding material; it is best to make clubs from it.
• Aspen, poplar and pine are softer and lend themselves well to various types of processing.
• But the most suitable for homemade wood is oak. Oak wood is well processed, light in weight, strong, does not lose its characteristics over time.

Before making a workpiece, you need to select a material that does not contain knots, rotten areas, curvatures, fiber heterogeneity, then dry it without exposure to direct sunlight. When the material is ready, a weapon blank is produced.

DIY wooden slingshot

The simplest wood weapon is a slingshot. With the help of this throwing weapon, you can hunt birds and small game, and for the manufacture you need a minimum of materials - a strong elastic band or tourniquet, and a branch with a fork (it is better to use hazel).

The fork is cut from the main part of the barrel of the desired size, sanded, a tourniquet is attached to both ends. For reliability, small cuts can be made at the ends of the slingshot so that the tourniquet does not slip.

Wooden club

A weapon similar in simplicity is a wooden club. The disadvantage of this projectile is that it requires a short distance to use it, which can be very difficult while hunting. To make a club, you need to use a young tree, cut down closer to the root, where the wood is most durable. The bark is carefully removed from the surface of the workpiece, all knots, it is soaked for a day in water, then dried over a fire until black, which is then removed by grinding with sand and grass. This procedure needs to be done several times, as a result of which a strong club is obtained that does not rot.

DIY wood knife

An equally difficult homemade weapon is a wooden knife. It can be cut in one piece from a wooden block, or it can be made from two parts. To do this, you need to draw a sketch of the workpiece on wooden blocks, then cut it out with a hacksaw. After that, both parts are glued together into a single whole. If the manufacture of a wooden knife is carried out in field conditions, then, as a rule, there is nothing to glue the component parts with. Therefore, it is cut from a solid block.

The blade sharpens well and is carefully sanded, after which it must be burned on fire, giving it strength. If possible, you can make the knife varnish, then moisture will not be afraid of it.

Wooden bow and crossbow

A bow or crossbow is an effective weapon in the forest, made of wood. There are many video examples of making a crossbow that describe the whole process in detail. First, the body of the crossbow with a groove for the arrow is cut. An arc will be attached at one end of the body, a trigger will be made at one third of the other end. It is better to make an arc from several layers of plywood, glued to each other, which, after drying, bend. You can make it out of metal. At both ends of the bow of the crossbow, holes must be made for attaching the bowstring. The arc is fastened to the body with a strong rope, if it is not at hand - with a wire. The bowstring is attached to the arc in such a way that it closely passes over the body, but does not touch it. The task of the trigger is to grab the bowstring and release it abruptly. The structure of the mechanism can be made in the form of a wide arc or a complex system of hooks.

Arrows for a crossbow are made of resilient wood, they are given a cylindrical shape, after which they are polished. The tip can be made of wood, metal or stone.

It is possible to make not only "cold" weapons from wood. You can make something like a pistol or a gun, but you need to understand that it will not last long. The algorithm for making a pistol is simple: you need to make a frame from wood to which the barrel is attached, as well as a trigger with a striker, you can add a magazine. A metal tube is used as a barrel.

How to make a weapon out of wood?

Gone are the days when homemade pistols and wooden slingshots were almost the only entertainment for children. Today, more and more parents prefer to buy a toy in a store, but the more valuable the experience is for a child when he creates a weapon simulator with his own hands with your help. Our article offers a simple way to make a homemade wooden machine gun that shoots special bullets.

Materials and tools

You need

Fixtures and tools

• saw;
• hammer;
• pliers;
• sandpaper;
• small screws;
• nails;
• pVA glue or instant.

The process of making homemade weapons from wood

Trunk

You can make an automaton without creating preliminary drawings. Using a saw, prepare 3 parts of the future machine of the following sizes from wooden blocks:

1. 300 * 50 * 15 mm - receiver.
2. 150 * 40 * 15 mm - handle.
3. 200 * 40 * 15 mm - magazine.

Butt

The stock is made from chipboard or a piece of board. Give it a distinctive shape. To do this, make one of the long sides of the rectangle beveled. You need to attach the butt to the receiver on the side where there is already a handle, using a hinged loop and self-tapping screws. Thus, you get a folding stock.

How to make a mechanism for shooting and bullets

Make a trigger and firing mechanism.

The final stage of making weapons

• give the receiver a somewhat rounded shape and paint the entire unit black;
• attach a latch to the left side of the machine, this will be the shutter.

You can watch a video about making weapons on this page.

Weapons made in this way should not be directed at people and animals, as metal bullets can cause injury. Make sure your child understands this well.

Children's wooden weapon. Ten options

by admin Published 06.06.2016 Updated 06.06.2016

Here we have presented ten variants of wooden weapons. Of course, not everything you can do with your own hands, for example, a wooden pistol. Only a professional who knows a lot about working with wood can make such a gun. By the way, the pistol is just lovely, most likely, it was made as a gift.

Now the rifle. It seems that these guns have some kind of special mechanism for automatic cocking of the hook or something similar. In any case, the rifles are very simple. The workpiece can be cut with a jigsaw, and then brought to mind using sandpaper or a sander.

Another rifle, it's still easier here. A gardening tool was used as a muzzle and everything else was cut from the board.

Here you can see a simple wooden sword, even a child can do something similar, not to mention an adult.

Here again you can observe weapons made by a master or craftsmen aerobatics... Only a top-class professional can do something like this.

Your child will definitely like such a sniper rifle, but the bad thing is that it is very, very difficult to execute.

Elven style sword. He also does very well. It is difficult to say whether a beginner will be able to create such a sword without special tools.

Balls in Japanese style. For them, by the way, you can make special stands, it will look very original.

Wooden Kalashnikov assault rifle, very high quality. It is a pleasure to look at him. One can only guess how much time and effort the master spent on its production.

Wooden pistol. Every father can do that.

In this article we have listed ten options for wooden weapons, we recently showed you ten ways to arrange brick clubs on your site.