Ammonium sulfate barium chloride. Qualitative analysis of cations - document. Ammonium and barium chloride sulfate, ammonium chloride and silver nitrate in molecules and ionic forms you need to write please help

Laboratory work 1-2

Qualitative analysis of cations

Na +

Flame coloring reaction

Dip a clean hot wire in a sodium chloride solution or put some hard salt on it. Inject the wire together with droplets or particles of sodium salt into the colorless flame of the burner - the flame will turn yellow.

K +

Flame coloring reaction

Volatile potassium compounds color a colorless flame with a characteristic purple... In the presence of sodium salts, the violet color of the flame becomes invisible, since the sodium compounds color the burner flame yellow.

Reactions with sodium hexanitrocobaltate (ΙΙΙ)

Place 1-2 drops of a solution of any potassium salt in a test tube, add 3-5 drops of sodium hexanitrocobaltate (ΙΙΙ) solution to it, add a few drops of 6 M acetic acid and rub with a glass rod against the walls of the test tube. In this case, yellow crystalline precipitate hexanitrocobaltate (ΙΙΙ) dipotassium sodium
:

or in ionic form:

The reaction should be carried out in the presence of dilute acetic acid.

Reaction with sodium hydrogen tartrate

Place 2-3 drops of a solution of any potassium salt in a test tube, add 0.5 ml of sodium hydrogen tartrate solution and rub against the walls of the test tube with a glass rod. After a while, a white crystalline precipitate will form:

or in ionic form:

Reaction conditions.

NH 4 +

Reaction with Nessler's reagent

Add to the drop diluted ammonium salt solution 1-2 drops of reagent solution. In the presence
- a characteristic red-brown precipitate is formed of ions; if there are traces, the solution turns yellow:

or in ionic form:

Other cations of Ι analytical group do not interfere with the detection of ammonium ions by Nessler's reagent.

Reaction with alkalis

Place a few drops of ammonium salt solution in a test tube
and add 5 drops of an aqueous solution of any of the strong bases -
- and heat the contents of the test tube in the flame of a gas burner. Due to decomposition of ammonium salt ammonia will be released:

or in ionic form:

Released ammonia can be detected in various ways:

by smell;

by blue discoloration of universal indicator paper moistened with distilled water and introduced into vapor above the solution;

by the formation of ammonium chloride smoke when a glass rod moistened with a drop of concentrated hydrochloric (hydrochloric) acid is brought to the opening of the test tube.

Boiling with caustic alkalis or sodium or potassium carbonates

Under the action of caustic alkalis or sodium or potassium carbonates, as well as with prolonged heating, ammonium salts in solutions decompose with the release of gaseous ammonia.

Mg ++

The action of strong bases.

When strong bases are added to solutions of magnesium salts, white sediment
... When a weak base (ammonium hydroxide) is added, the precipitation is incomplete, and in the presence of ammonium salts, no precipitate occurs at all. Therefore, ammonium salts must first be removed from the solution.

Place a few drops of the solution in a test tube MgCl 2 , add a few drops of an aqueous solution of one of the strong bases -. Will precipitate Mg(HE) 2 . To another test tube to the solution MgCl 2 instead
add ammonium hydroxide solution. Note which tube is producing the most sediment.

Reaction with sodium monohydrogen phosphate

Microcrystalloscopic reaction.

D for microcrystalloscopic detection
- ions in the form
put a drop of solution
on slide ... Then add to it from a capillary pipette first a drop of solution
, then a drop of concentrated aqueous ammonia solution. Finally, add the crystal to the solution
(sodium hydrogen phosphate). It is recommended to heat the glass slide. In the immediate vicinity of the sodium phosphate crystal, dendritic crystals appear, at a farther distance - correctly formed crystals in the form of six-rayed stars. - magnesium ammonium phosphate

or in ionic form

Examine the crystals under a microscope.

Ca ++

Reaction with ammonium oxalate.

Place 1-2 drops of a solution of a calcium salt in a test tube, for example
, and add 1-2 drops of acetic acid so that the reaction of the medium is acidic (in the case of methyl red indicator, the color should turn orange). Add a few drops of ammonium oxalate solution
In this case, from the concentrated solution immediately, and from the diluted solution gradually drops out white fine crystalline precipitate
... In the presence
calcium oxalate precipitates quantitatively:

or in ionic form:

Microcrystalloscopic reaction with sulfuric acid .

P place a drop of calcium chloride solution on a glass slide, then add a drop of diluted
and lightly evaporate the mixture. In this case, beautiful characteristic bunches of needles – gypsum crystals
, easily distinguishable under a microscope.

Flame coloring reaction

Calcium ions color the colorless flame to a brick-red color.

Ba ++

Reaction with potassium chromate (or dichromate) .

Place 1-2 drops of a solution of a barium salt in a test tube, for example
, and add a few drops of the solution
or . Heat the test tube over a burner flame. In this case, yellow crystalline precipitate:

or in ionic form:

or in ionic form:

2


Drop reaction with sodium rhodizonate.

Place a drop of a neutral test solution on a filter paper and then a drop of an aqueous solution of sodium rhodizonate. Formed red-brown barium rhodizonate precipitate:

+
+

Barium rhodizonate in the cold in hydrochloric acid turns into bright red barium hydrogen rhodizonate:

Flame coloring reaction.

A colorless flame is colored by barium ions in yellow-green color.

Reaction with sulfuric acid or ammonium sulfate.

Place a few drops of a water-soluble barium salt in a test tube, for example

barium chloride, add 1 ml of dilute sulfuric acid or ammonium sulfate solution. In this case, white crystalline precipitate barium sulfate
.

Al +++

Reaction with ammonium hydroxide.

Place 1 ml of aluminum salt solution in a test tube, for example
, add a few drops of ammonium hydroxide solution to it and heat. In this case, white wouldefigurativesedimenthydroksidaaluminum:

or in ionic form:

Transfer the precipitate of aluminum hydroxide together with the solution into a centrifuge tube and centrifuge. Drain the clear solution, and divide the precipitate into two parts.

Carry out the following test reactions:



Hence, is a typical amphoteric compound.

Reaction with alizarin (1,2-dioxyanthraquinone)

Test tube reaction. Place in a test tube 2 drops of a solution of some aluminum salt and add 5 drops
... This will form a precipitate. Add a few drops of freshly prepared alizarin solution to the resulting precipitate and boil. Alizarin forms an intensely red compound with aluminum hydroxide, called aluminum varnish. Aluminum varnish does not dissolve in dilute acetic acid. Therefore, after cooling the contents of the test tube, add a little acetic acid to a weakly acidic reaction (pH ~ 4-5). In the presence of aluminum ions, the red precipitate does not disappear.

Reaction conditions.

When carrying out a test tube reaction, the pH value at the beginning of precipitation should exceed 7, corresponding to a weak ammonia solution, and after precipitation, the pH may be less than 7, corresponding to a dilute acetic acid solution (pH \u003d 4-5).

The reaction is carried out by boiling.

The presence of precipitates of other hydroxides, even in small quantities, is undesirable, and in large quantities is unacceptable.

Cr +++

Oxidation C r +3 chromium in Cr +6

Place in a test tube 2-3 drops of a solution of chromium (III) sulfate or nitrate, add 5 drops of hydrogen peroxide to it
, 3-5 drops of potassium hydroxide KOH. Heat the mixture to a boil.

In this case, the oxidation of -ions to
-ions and coloring from blue-green goes into yellow.

With the resulting solution, carry out the following verification reactions to confirm the formation of -ions.

Fe +++

Reaction with

Place 1-2 drops of solution in a test tube or on a glass slide
, acidify the solution with 1-2 drops of hydrochloric acid, add 2-3 drops of yellow blood salt - a solution of potassium hexacyanoferrate (II)
In this case, dark blue Prussian blue sediment:

Reaction with ammonium thiocyanate.

Place 1 ml of the solution in a test tube, dilute it with five drops of distilled water and add 3-5 drops of ammonium thiocyanate solution
... Thus appears blood red staining:

or in ionic form:

Reaction with sodium, potassium or ammonium hydroxide.

Under the action of solutions
and ions are formed brownish red sediment Fe (OH) s, soluble in acids:

Fe ++

Reaction with

Place 1-2 drops of solution in a test tube or on a glass slide FeSO 4 , add 2-3 drops red blood salt - solution of potassium hexacyanoferrate (III) In this case, the formation turnboolean blue:

Zn ++

Reaction with sodium, potassium and ammonium hydroxide.

When sodium or potassium hydroxide acts on zinc chloride, white sediment Zn(OH) 2 , soluble in excess and.

Get a zinc hydroxide precipitate in a test tube, separate it from the solution using a centrifuge. Divide the sediment into two parts. Dissolve one part of the precipitate in the acid solution, the other in the base solution. Write down the reaction equations to confirm the amphotericity of zinc hydroxide.

Mn ++ reactions

Reaction with sodium hydroxide and hydrogen peroxide.

Manganese ions are characterized by oxidation-reduction reactions.

One of the characteristic oxidation reactions
in an alkaline environment is its interaction with. Under the action of hydrogen peroxide in an alkaline medium, colorless manganese (II) ions are oxidized to insoluble manganese (IV) compounds
or
colored brown:

or in ionic form

Carry out the oxidation of -ions to. To do this, place 1-3 drops of a solution of any manganese salt in a test tube and add a few drops of NaOH solution. A white precipitate of manganese hydroxide is formed, which slowly turns brown due to oxidation in air:

Add a few drops to the resulting sediment. The precipitate instantly turns brown-black due to the rapid oxidation of manganese (II) ions.

Reaction conditions.

Oxidation -ions to
- -ions in an acidic environment.

Manganese (II) compounds are oxidized in an acidic medium by strong oxidants to manganic acid. One of the most important oxidation reactions in nitric acid or sulfuric acid medium is the interaction of -ions with
or
... In this case, colorless compounds of divalent manganese () are oxidized to manganese compounds with an oxidation state of +7 (
), colored violet-red:

or in ionic form:

In the presence of reducing agents, including
, there is a reduction of oxidants and. Therefore, solutions cannot be acidified with hydrochloric acid.

Carry out the oxidation of -ions to -ions. To do this, place 1-2 drops of a solution of any manganese salt (nitrate or sulfate, but not chloride !), add 5 drops of diluted (1: 1) nitric acid, add a small amount of an oxidizing agent (lead dioxide) and heat the mixture to a boil. Pour 1-2 ml of distilled water into a test tube, without stirring, the contents of the test tube, and let the mixture stand for a while. A raspberry-red color appears, caused by the manganic acid formed. Since it may contain manganese compounds in the form of an impurity, it is recommended to run a blank experiment, observing the same conditions, but without adding the test solution to the test tube. In the absence of impurities, color does not appear.

The described oxidation reaction to manganic acid is a very sensitive reaction.

Reaction conditions

Qualitative analysis of anions

Cl -

Reaction with silver nitrate

Add a few drops of nitric acid and solution to 1-2 ml of sodium or potassium chloride solution
... In the presence of Cl - ions, a white curdled precipitate of AgCl precipitates:

In the light, the precipitate darkens. To make sure that the resulting precipitate really contains AgCl, since other ions give similar precipitates, rinse the precipitate with distilled water and centrifuge. Drain the water. Add ammonia solution to the resulting precipitate. In this case, AgCl dissolves, forming a complex cation
.

To the solution of the complex compound, add a solution of diluted
... The complex ion is destroyed and AgCl precipitates again. The appearance of a precipitate is evidence of the presence of Cl - ions in the analyte. The described reactions proceed according to the following equations:



Oxidation reaction
-ions to free chlorine

Place 5 drops of the solution containing β-ions into a test tube, add 0.5 ml

concentrated solution
. 5 drops of concentrated and heat (under traction!). In this case, partial or complete discoloration of the solution is observed and the release of gaseous chlorine, which is opened with starch iodine paper (blue coloration).

The reaction proceeds according to the equation:

To detect the evolving C1 2, bring a wet

starch iodine paper. In the presence of chlorine, a blue color appears due to the release of elemental iodine:

Manganites, manganates, permanganates, manganese and lead dioxides, chromic anhydride, hypochlorous, chloric and nitric acids, etc. have an oxidizing effect.

Reaction conditions.



or in ionic form:



Br -

Reaction with silver nitrate

Add a few drops of nitric acid and solution to 1-2 ml of sodium or potassium bromide solution. In presence
-ions a yellowish curdled precipitate falls out AgBr... Check its solubility in sodium thiosulfate solution
, in ammonia solution and in ammonium carbonate solution
.

Oxidation reaction -ions chlorine water to free bromine

Place in a test tube 5 drops of KBr solution, 1-2 drops of diluted,

0.5 ml of benzene and 2-3 drops of chlorine water. Shake the tube. In the presence of β-ions, benzene turns yellow-brown.

The reaction is applicable for the detection of -ions in the presence of - and
-ions.

Reaction conditions.

J -

Reaction with silver nitrate.

Ions (unlike and -ions) with silver ions form a yellow curdled precipitate, soluble only in solutions of potassium cyanide and.

Add a few drops of nitric acid and solution to 1-2 ml of sodium or potassium iodide solution. Check the solubility of the resulting precipitate in solution.

Oxidation reaction - ions with chlorine water to free iodine

The reaction is carried out similarly to the oxidation of bromides with chlorine water. Place 5 drops of potassium iodide solution KJ, 1-2 drops of diluted sulfuric acid, 0.5 ml into a test tube

benzene and 1-2 drops of chlorine water. Shake the contents of the tube. In the presence of β-ions, the benzene layer turns red-violet:

With an excess of Cl 2, free iodine is not released and the benzene layer is not colored:

All oxidizing agents used for the oxidation of HCl and HBr can also be used as oxidants.

Reaction conditions.

Oxidation reaction -ions with potassium permanganate

Place 3-5 drops of the test solution containing β-ions into a test tube, acidify the solution with a few drops of the diluted one and add 1-2 drops of the solution to it.

In the presence of -ions, the solution becomes discolored in the cold and iodine is released. Moderate heating promotes the reaction:

Reaction conditions.

As soon as a red color appears, the addition of the solution is stopped and it

the excess is reduced with 1-2 drops of hydrogen peroxide. Excess hydrogen peroxide is decomposed by boiling the solution.

Iodate can be easily detected when potassium iodide is added to the resulting solution. In this case, iodine is released in a larger amount than during oxidation directly with permanganate:

N0 3 -

The reaction of reducing nitrates to ammonia with zinc or aluminum

Place 5 drops of a solution of potassium or sodium nitrate in a test tube, add 0.5 ml of NaOH or KOH solution to it, and then add 25-50 mg of zinc dust or aluminum powder. To speed up the reaction, heat the mixture on a gas burner.

Zinc dust (or aluminum powder) in alkaline solutions reduces nitrates to ammonia:

The ammonia liberated during this process is detected as previously described.

Interaction with diphenylamine

Place 3 drops of diphenylamine solution on a glass slide
in sulfuric acid and 2 drops of sodium nitrate solution. In the presence
-ions appears dark blue stainingcaused by the products of oxidation of diphenylamine with nitric acid.

SO 3 -

Sulfurous acid reduction reaction

Place 3-5 drops of a sulfurous acid salt solution (for example,
), 3-5 drops of freshly prepared concentrated hydrochloric solution
and heat the contents of the tube. Wherein

Place 1 drop of solution on a piece of filter paper
and 1 drop of sodium rhodizonate or rhodizonic acid solution. This forms a red spot of barium rhodizonate. Moisten the red spot with 1-2 drops of sodium sulfate solution. In the presence of sulfates, the color of barium rhodizonate disappears immediately. Barium ions with sodium rhodizonate or rhodizonic acid give a reddish-brown precipitate that does not decompose with dilute HC1. Barium rhodizonate instantly decolorizes with sulfates and sulfuric acid due to the formation of insoluble barium sulfate. The considered reaction is specific and is used only for the detection of sulfates.

CO 3 -

R reaction of formation of carbon dioxide (carbon dioxide)

Place 1 ml of sodium carbonate Na 2 CO 3 solution into a test tube, add a 2 M HC1 solution to it and quickly close the test tube with a stopper, into which a branch tube is inserted. Dip the other end of this tube into a test tube with lime water (fig.).

Carbon dioxide, passing through a solution of Ca (OH) 2, forms a white precipitate or haze of CaCO 3.

Write the reaction equation in molecular and ionic forms.

RO 4 ---

Reaction with ammonium molybdate

Pour 1 ml of sodium phosphate solution into a test tube
or potassium, add a few drops of 6M HNO 3 and some hard salt - ammonium molybdate (NH 4) 2 MoO 4. Heat the contents of the tube. A yellow precipitate of ammonium phosphoromolybdate appears.

PO 4 3- + 3NH 4 + + 12 MoO 4 2- + 24 H + \u003d (NH 4 ) 3 PO 4 ∙ 12 MoO 3 ∙ 2H 2 O ↓ + 10 H 2 O

The precipitate dissolves easily in aqueous ammonia solution.

Control task.

Salt is given. Determine which cation and anion are included in its composition.

Salt analysis

1. Preliminary tests

a) Flame coloring.

Na + - yellow

Ca 2+ - brick red

K + - purple

Ba 2+ - yellow-green

Cu 2+ - green.

c) Checking the pH of aqueous solutions.

If pH\u003e 7, then the salt contains a strong base cation (alkali or alkaline earth metal)

If the pH is 7, then it is a salt formed by a strong base and a strong acid.

d) The action of dilute sulfuric acid – only carbonate ions CO 3 2 – decompose with dilute acids with the release of CO 2.

e) The action of concentrated sulfuric acid - decomposes Cl -, Br -, J -, NO 3 -, MnO 4 - with the release of Cl 2, HCl, HBr, Br 2, J 2, NO 2, O 2, etc.

f) Detection of some cations.

NH 4 +

Add a solution of Nessler's reagent to the sample drop. The appearance of a red-brown precipitate proves the presence of an ammonium ion in the salt.

Add sodium hydroxide solution to the sample and heat. In the presence of an ammonium ion in the salt, the smell of ammonia appears, and on a stick moistened with a solution of concentrated hydrochloric acid - a white coating of ammonium chloride.

Fe 3+

Add K 4 solution to the sample. Prussian blue is formed.

Add a few drops of KSNS to the sample. A red color appears.

Fe 2+ Add K 3 solution to the sample. The appearance of the turnbull blue is noted.

2. Analysis progress .

1. First, the cations are determined in the sample.

2. At the second stage of the analysis, anions are determined in the sample. Before that, preliminary tests are carried out for the content of Cl -, SO 4 -2 ions. For this, solutions of AgNO 3 and Ba (NO 3) 2 are added to separate portions of the sample. The precipitation of a curdled precipitate of Ag Cl and crystalline Ba SO 4 indicates the presence of these ions in the sample.

Document

Test work number 1 Quality analysis... Heterogeneous equilibria SAMPLE SOLUTION Quality analysis Group and quality reactions to cations and anions needed ...

Analysis of hormones, antigens, antibodies and vitamins (2)

Analysis

Tenge 590 tenge 179. Eosinophilic cationic protein (ECP) 5 w.d. - ... w.d.-1500 tenge 52. Hepatitis B virus ( quality analysis) / Real-time / (sensitivity 5 IU ... 3-5 w.d.-5000 tenge 54. Hepatitis D virus ( quality analysis) / Real-time / blood with EDTA 1-2 ...

Working program of the discipline "analytical chemistry" Profession: "Laboratory assistant-ecologist"

Working programm

For coloring complexes. 1h TOPIC: Quality analysis cations and anions 1. Interaction of barium ions ... (1). Topic 6 Quality analysis cations and anions. Hydrogen sulfide classification cations... First Analytical Group cations (cations sodium groups ...

As mentioned, the ammonium cation NH 4 plays the role of a metal cation and forms salts with acid residues: NH 4 NO 3 - ammonium nitrate, or ammonium nitrate, (NH 4) 2 SO 4 - ammonium sulfate, etc.

All ammonium salts are solid crystalline substances, readily soluble in water. In a number of properties, they are similar to alkali metal salts, and first of all to potassium salts, since the radii of the K + and NH + 4 ions are approximately equal.

Ammonium salts are prepared by reacting ammonia or its aqueous solution with acids.

They have all the properties of salts due to the presence of acidic residues. For example, ammonium chloride or sulfate react with silver nitrate or barium chloride, respectively, forming characteristic precipitates. Ammonium carbonate reacts with acids, as the reaction produces carbon dioxide.

In addition, the ammonium ion determines another property common to all ammonium salts: its salts react with alkalis when heated to release ammonia (Fig. 133), for example:

or in ionic form:

Figure: 133.
Qualitative reaction for ammonium ion

This reaction is a qualitative reaction for ammonium salts, since the formed ammonia is easy to detect (in what ways can this be done?).

Laboratory experiment No. 31
Recognition of ammonium salts

The third group of properties of ammonium salts is their ability to decompose when heated with the release of gaseous ammonia, for example:

In this reaction, gaseous hydrogen chloride is also formed, which evaporates together with ammonia, and when cooled again combines with it, forming salt, that is, when heated in a test tube, dry ammonium chloride seems to sublime, but on the cold walls of the upper part of the test tube it again settles into the form of white crystals of NH 4 Cl (Fig. 134).

Figure: 134.
Sublimation of ammonium chloride

The main fields of application of ammonium salts have been shown earlier (see Fig. 132).

Here we draw your attention to the fact that almost all ammonium salts are used as nitrogen fertilizers. As you know, plants are able to assimilate nitrogen only in a bound form, that is, in the form of NH + 4 or NO - 3 ions. The remarkable Russian agrochemist D.N. Pryanishnikov found out that if a plant has a choice, it prefers the ammonium cation to the nitrate anion, therefore the use of ammonium salts as nitrogen fertilizers is especially effective. A very valuable nitrogen fertilizer is ammonium nitrate NH 4 NO 3.

Let us note other areas of application of some ammonium salts.

Ammonium chloride NH 4 Cl is used for brazing, as it cleans the metal surface from the oxide film and the solder adheres well to it.

Ammonium bicarbonate NH 4 HCO 3 and ammonium carbonate (NH 4) 2 CO 3 are used in the manufacture of confectionery products, since these compounds decompose easily when heated and form gases that loosen the dough and make it lush:

Ammonium nitrate NH 4 NO 3 mixed with powders of aluminum and coal is used as an explosive - ammonal, which is widely used in the development of rocks.

New words and concepts

1. Ammonium salts.
2. Properties of ammonium salts due to ammonium ion, acid residues. Decomposition of ammonium salts.
3. Qualitative reaction to ammonium ion.
4. Chloride, nitrate, ammonium carbonate and their applications.

Self-study assignments

How to eliminate the interfering effect of a large amount of chloride ions in the determination of ammonium ion in water?

Silver nitrate?

Ammonium chloride Sodium chloride 0.9% Latin name Sodium chloride 0.9% Pharmacological groups Excipients, reagents and intermediates. ... Silver nitrate Silver nitrate -. Clerimed Klerimed.

What does TRILON have to do with chloride ions?

Ammonium salts can be detected using: sodium hydroxide, sulfuric acid, barium chloride, silver nitrate?

Barium chloride

Make molecular equations of reactions. 5. With which of the following substances will copper chloride II silver nitrate, sodium chloride, iron, phosphoric acid, potassium hydroxide react?

With the help of sodium hydroxide, since ammonia is released - a gas with a pungent odor.

Ammonium sulphate and barium chloride, ammonium chloride and silver nitrate in molecules and ionic forms you need to write please help

Nh4So3
bacl
agno3

Of all the oxidizing solutions considered, the solution of silver nitrate and copper nitrate turned out to be universal. ... Recipe 2 is light brown. - Sodium chloride 100 - Ammonium nitrate 100 - Copper nitrate 10.

Molecular total ionic shortened ionic equations for the reaction between barium nitrate and ommonium sulfate

Help write the chemical name of THESE SALTS, which class they belong to

If I haven't forgotten the chemistry (I'm not sure about the classes)
1- sodium bicarbonate (acidic salt)
2- sodium carbonate (medium)
3- calcium carbonate (medium)
4- potassium carbonate (medium)
5- I don't know what to call it, but the class is like double salts
6- mercury chloride (medium)
7- no idea at all
8- ammonium nitrate,
9-silver nitrate
10- don't know too

According to the titrated solution of silver nitrate, the titer of ammonium thiocyanate is established in the following way. ... The principle of Mohr's method is based on the precipitation of chlorides with silver nitrate in the presence of potassium chromate К2СЮ4.

5) Dolomite carbonate class (medium)
10) Potassium alum. I don't know the class.

What reagent is used to determine the ammonium ion - potassium sulfate, or silver nitrate, or potassium hydroxide, or barium chloride?

Silver nitrate.
As a result of the reaction, a dark precipitate of silver nitrate should precipitate.

What gases can you get, having at your disposal the following substances sodium chloride, sulfuric acid, ammonium nitrate, water, ammonium nitrite, hydrochloric acid, potassium permanganate, sodium hydroxide, aluminum carbite ...

Write the equations for the ion-exchange reactions of ammonium chloride with silver nitrate and potassium hydroxide. Write ionic equ.

So
NH4Cl + AgNO3 \u003d NH4NO3 + AgCl
NH4 + + Cl- + Ag + + NO3- \u003d NH4 + + NO3- + AgCl
Cl- + Ag + \u003d AgCl

Since the composition of ammonium nitrate contains chloride ions, when interacting with the added solution of silver nitrate, a white precipitate will form, similar in appearance to a soap solution, that is, a precipitate of silver chloride will precipitate.

How to get NH4NO3 from NH4Cl

Ammonium nitrate Ferrous nitrate Sodium nitrate Silver nitrate Sodium nitrite Hydrogen peroxide Permanganate kalpa Mercury p.31. Aluminum hydroxide bromide sulfide chloride Ammonia gaseous liquid solution Ammonium nitrate oxalate ...

How to prove with the help of a reaction that NH4 + and Cl- ions are part of ammonium chloride?

Can add water and get hydrochloric acid and ammonia / there will be a pungent smell /.

Standardization of ammonium thiocyanate solution with respect to silver nitrate. ... Chlorides, bromides, iodides are detected using a solution of silver nitrate as a reagent, and a silver ion is detected by reaction with chlorides.

What is the mass of silver chloride obtained by the interaction of 10.7 g of ammonium chloride with silver nitrate,

AgNO3 + NH4Cl \u003d AgCl + NH4NO3
53.5 ----143.5
10.7 ------ x
x \u003d 28.7 g
28.7: 143.5 \u003d 0.2 mol

Silver nitrate standard solutions prepared from commercial preparations containing a certain amount of impurities are established using chemically pure sodium chloride. ... 37. Determination of ammonium nitrogen in ammonium salts.

How To Distinguish Ammonium Sulfate Ammonium Chloride Ammonium Nitrate

The last one smells \u003d)))

Description. Barium chloride under standard conditions is colorless rhombic crystals. ... BO2 2 Barium nitrate Ba NO3 2 Barium nitride Ba3N2 Barium nitrite Ba NO2 2 Barium oxalate BaC2O4 Barium oxide BaO Peroxide ...

Unified State Exam in Chemistry, trivial names of substances.

And when asked where ??? see the Chemical Encyclopedic Dictionary - everything is there

Ammonium chloride, ammonium chloride, mouth. technical name - ammonia NH4Cl salt, white crystalline, slightly hygroscopic ... This method consists in direct titration of chlorides and bromides with a solution of silver nitrate in the presence of ...

Three numbered glasses without labels contain solutions of sodium chloride, ammonium chloride and ammonium nitrate ...

Mix everything, mix thoroughly, add water. sodium chloride will dissolve, ammonium chloride will float, ammonium nitrate. will precipitate.

Silver nitrate solution corresponds to 0.009 796 g of ammonium bromide. solution of no silver veil, which corresponds to at least 99% ammonium bromide and not more than 1 p of ammonium chloride.

Please wash with a chemistry test.

1) Magnesium dissolves easily in
3) HCl solution
2) With each of the substances: H2O, Fe2O3, NaOH - will interact
2) magnesium BUT IN GENERAL I WOULD SAY THAT THERE IS NO CORRECT OVVET
3) With each of the substances, the formula of which will interact: NaOH, Mg, CaO
4) copper (II) oxide
4) Iron (III) oxide does not interact with
2) water
5) Reacts with sodium hydroxide solution
1) P2O5
6) Determine the formula of the unknown substance in the reaction scheme: H2SO4 +.\u003e MgSO4 + H2O 3) Mg (OH) 2
7) Among substances: CaCO3, Ba (NO3) 2, CuSO4 - reacts with hydrochloric acid (s)
3) only CaCO3
8) Reacts with calcium hydroxide and silver nitrate
2) ammonium chloride

What is ammonium nitrate, ammonium nitrate, ammonium nitrate. It is a fertilizer containing 34–35% nitrogen. ... ... pure nitric acid, 1 2 silver nitrate in crystals, and the items must be covered with etching ...

How to clean silverware?

It works well - with tooth powder!

Labels Silver nitrate for cauterization of vessels, silver nitrate salt, silver nitrate plus sodium chloride. ... CH3 2CHCH2CH2ONO2 Methyl nitrate CH3ONO2 Actinium nitrate III Ac NO3 3 Aluminum nitrate Al NO3 3 Ammonium nitrate ...

Ili voskom.ili zubnoi pastoi

Ammonia

It depends on what. From blackening, you can use toothpaste.

Decorations - cheapest toothpaste and brush

Brush with tooth powder or plain white toothpaste.

Translation into Russian ammonium chloride. agrovoc. ... iv salts such as ammonium chloride, potassium perchloric acid, potassium carbonate, sodium carbonate, perborate, silver nitrate. ... The approach to ammonium nitrate is special due to the fact that ...

Before you start cleaning a silver item, you must first wash it in warm soapy water. Then coat with gruel from a mixture of ammonia and chalk. After the mixture has dried, the item must be rinsed very thoroughly with water and wiped with a dry cloth. Very oxidized silver is cleaned with a solution of 1/4 of sodium sulfate and 3/4 of water. In order for silver spoons, forks and knives to always shine, after use, they must be immediately immersed in boiling water with a small amount of soda. Dark spots from egg yolks are easy to clean with ash. Spoons, knives, forks and other products made of cupronickel and silver can be cleaned with toothpaste, after wiping with a soft cloth.

"Take a bowl, line it with foil (so that not only the bottom, but also the walls are covered), put salt (on a small bowl of 1 tbsp. L.), Silverware and pour boiling water. Before your eyes, the silver will peel. , you can interfere with it. "
I checked it myself, it works great.

Chemistry assignment (There are solids in three test tubes without labels ...)

1 Barium nitrate prove ammonium sulfate, as a result of the reaction, precipitates of barium sulfate are obtained.
2 Silver nitrate to prove ammonium chloride as a result of the reaction precipitates of silver chloride are obtained.

Other ammonium salts, not containing iron, are prepared similarly to ammonium chloride, taking into account the solubility of this salt in water. ... Silver nitrate. Silver nitrate. GOST 1277-75.

Help

What is this ...

Ammonium nitrate ammonium nitrate ammonium nitrate nitrate ... Lapis pencil is sold in pharmacies, is a mixture of silver nitrate ... 30%. Composition 3 Silver chloride I silver chloride silver chloride AgCl.

What is back titration

In direct titration methods, the analyte reacts directly with the titrant. One working solution is sufficient for analysis by this method.
Back titration methods (or, as they are also called, residue titration methods) use two titrated working solutions: main and auxiliary. It is widely known, for example, the back titration of the chloride ion in acidic solutions. A known excess of a titrated solution of silver nitrate (main working solution) is first added to the analyzed chloride solution. In this case, the reaction of formation of poorly soluble silver chloride occurs: Ag + + Cl- → AgCl. The unreacted excess amount of AgNO3 is titrated with a solution of ammonium thiocyanate (auxiliary working solution): Ag + + SCN- → AgSCN. The chloride content can be calculated, since the total amount of substance (mol) introduced into the solution and the amount of AgNO3 substance that has not reacted with chloride are known.

The main Chemistry ammonium sulfate sodium hydroxide lead nitrate 2 iron chloride 3 sodium silicate hydrochloric acid silver nitrate chloride.

Bravo! There is nothing to add, as they say!

Help solve two chemistry tasks! please

What to ask your relatives for your 13th birthday?

Set - Young chemist "Large chemical laboratory.
This set includes all experiments that are included in the small sets.
2490 RUB
Chemical elements and items included in the kit:
cobalt chloride
acetone
copper sulfate
sodium sulfate
potassium iodide
bromcresol purple
iron chloride
methyl violet
potassium permanganate
10% hydrochloric acid solution
calcium hydroxide
phenolphthalein solution
10% nitric acid solution
zinc
sodium phosphate
calcium chloride
sodium hydroxide solution
10% aqueous ammonia solution
iron
copper
aluminum oxalic acid
silver nitrate solution
nickel sulfate
hexane
ammonium dichromate
graphite rods
Light-emitting diode
power generator
Petri dish
test tubes
putty knife
dry fuel
test tube holder
steaming cup
tubule
slide
test tube with a stopper with a hole
L-shaped tube
filter paper
universal indicator paper
beaker
brush
nichrome wire
stand for test tubes
copper wire

4. What reagent is used to determine the presence of ammonium cations in the mixture and on what basis? ... 8. How can the white precipitate of silver chloride be distinguished from the white precipitate of mercury chloride I?

Ask for a minecraft license or five nights with freddy to play games.

Lord, what are you asking ???
Here is a list of a 13-year-old kid:
From mom - tablet
From dad - Moped
From Aunt, uncle - video set-top box
From grandparents - New game computer

Well done, develop your talent). Think hard, surf the internet. I was fond of history, and always asked me to buy textbooks for grade 10.

In this case, I advise you to ask for the scientific and educational set 4M "Amazing Crystals": http://www.mishamasha.ru/catalog/igrushki_i_knigi/poznavatelnye_i_obuchayushchie_igrushki/nauchno_poznavatelnyy_nabor_4m_kudivitml

help me please

I don't understand hee hee

Ammonium chloride, sulfate, ammonium carbonate, silver nitrate, barium chloride, sodium hydroxide, sulfuric acid, litmus. paper, chemical glassware for experiments. March 21, 2012

1) Cu + FeCl2 \u003d 2) Mg + FeCl2 \u003d 3) Zn + MgBr2 \u003d 4) Fe + KBr \u003d
2. Does it react with phosphoric acid solution?

1) S 2) CaO 3) H2 4) NaCl

3.Reacts with sodium silicate solution?

1) iron oxide (2) 2) potassium nitrate 3) carbon monoxide (2) 4) hydrochloric acid

4. Are the following judgments about the safety rules for working in a chemical laboratory correct?

A) Work with sodium chloride solution with gloves.
B) Oxygen in the laboratory is obtained in a fume hood.

5. Which of the following reactions is used to produce hydrogen in the laboratory?

1) decomposition of hydrogen chloride 2) decomposition of ammonia 3) interaction of potassium with water 4) interaction of zinc with dilute sulfuric acid

6. Copper (2) chloride is formed as a result of interaction of copper oxide (2) with:

1) hydrochloric acid 2) sodium chloride solution 3) ammonium chloride solution 4) chlorine

7. Barium hydroxide solution reacts with each of two substances:
1) MgO and SO2 2) KCl (solution) and H2S 3) CO2 and H2O 4) FeCl3 (solution) and HCl (solution)

8. Between what substances a chemical reaction takes place:

1) barium chloride and zinc sulfate 2) calcium carbonate and sodium nitrate 3) magnesium silicate and potassium phosphate 4) iron sulfate (2) and lead sulfide

9. Are the following judgments about the purpose of equipment in a chemical laboratory correct?

A. Use crucible tongs to hold the tube while heating.

B. Using a thermometer, measure the density of the solution.

1) only A is true 2) only B is true 3) both statements are true 4) both statements are false

10. The presence of hydrogen ions in a hydrochloric acid solution can be proved by:
1) a change in the color of phenolphthalein to raspberry 2) a change in the color of litmus to blue 3) the evolution of hydrogen with the addition of zinc 4) the evolution of oxygen when heated

11. Physical phenomena include:
1) sour milk 2) sugaring jam 3) burning a candle 4) burning food

12. The largest amount of ammonium ions is formed during the complete dissociation of 1 mol:

1) ammonium sulfate 2) ammonium sulfide 3) ammonium nitrate 4) ammonium phosphate

13. Oxygen does NOT react with:

1) carbon monoxide (4) 2) hydrogen sulfide 3) phosphorus oxide (3) 4) ammonia

14. Each of two substances reacts with a solution of calcium hydroxide:

1) CO2 and CuCl2 2) CuO and HCl 3) HNO3 and NaCl 4) Al (OH) 3 and KNO3

15. Carbon monoxide (4) interacts with:

1) KNO3 2) P2O5 3) Ca (OH) 2 4) HCl

16. Are the following judgments about pure substances and mixtures correct?
A. Mineral water is a pure substance

B. Perfume is a mixture of substances.
1) only A is true 2) only B is true 3) both statements are true 4) both statements are false
17. Both aluminum and sulfur oxide (4) react with:

1) hydrochloric acid 2) sodium hydroxide 3) oxygen 4) barium nitrate 5) carbon dioxide

_______________________________________________________________

1) a weak electrolyte is: a) sodium hydroxide b) hydrochloric acid c) distilled water d) sodium chloride solution 2) between which substances

possible ion exchange reaction with gas evolution? a) H2SO4 and Ca3 (PO4) 2 b) AL2 (SO4) and BaCl2 c) Na2CO3 and HCl d) HNO3 and KOH 3) SUM OF ALL COEFFICIENTS IN THE PONOMIC AND ABBREVIATED IONIC EQUATIONS BETWEEN CHLORIDE AND CHLORIDE EQUAL: a) 10; 3 b) 10; 6 c) 12; 3d) 12; 6 4) calcium carbonate can be obtained by the reaction of ion exchange when a) interaction of sodium carbonate and calcium hydroxide b) calcium sulfate with carbonic acid c) calcium chloride with carbon dioxide d) calcium with carbon monoxide (4)

write the equations for the reactions of a) nitrogen with lithium (indicate the oxidation states of the elements and indicate the oxidizing agent and reducing agent) b) obtaining ammonia from

ammonium salts c) ammonium chloride solution with silver nitrate solution (in molecular and ionic forms)

PHOSPHORUS AND ITS COMPOUNDS 1.Write the reaction equations for the interaction of: a) phosphorus with oxygen b) phosphine (PH3) with

hydrogen chloride

c) a solution of phosphoric acid with potassium hydroxide (in molecular and ionic forms)

2. how do you prove that red and white phosphorus are two allotropic varieties of the same element?

3 ... Three numbered test tubes contain solutions of phosphoric and hydrochloric acids, sodium phosphate. How can they be recognized empirically? Write the corresponding reaction equations

4. Write the reaction equations of interaction:

a) phosphorus with chlorine

b) phosphorus with magnesium

c) sodium phosphate solution with silver nitrate solution (in molecular and ionic forms)

5. Explain why phosphorus is distributed in nature only in the form of compounds, while nitrogen in the same group with it is mainly in free form?

6. Write the reaction equations with which you can carry out the following transformations:

P-\u003e Ca3P2 -\u003e (^ H2O) PH3-\u003e P2O5

HELP WITH THE TEST! PLEASE! The reaction between ammonium chloride and calcium hydroxide occurs because: a) a precipitate forms b) ammonia gas is released

c) salt is formed d) the reaction does not go Ammonia burns in oxygen in the presence of a catalyst with the formation of: a) nitrogen b) nitrogen oxide (||) c) nitric oxide (|||) d) nitric acid Oxidation state of nitrogen in the ammonia molecule: a) 0 b) +3 c) -3 d) +5 Ammonia is ..: a) ammonia solution in water b) ammonia solution in alcohol c) ammonium chloride d) table salt